Premium composite and aluminum decking are closer in price than most people expect: high-end composite runs roughly $18–25 per sq ft in material, compared with $29–31 for Craft-Bilt aluminum. Premium composite resists staining and mould far better than entry-level deck boards and comes with long, limited warranties. Aluminum decking pulls ahead where a plastic-based board can’t: non-combustible construction, an embedded non-skid surface, no static build-up, lifetime warranty, and a board that doesn’t rely on a polymer cap for durability.

Composite pricing reflects premium capped composite and PVC lines such as Trex Transcend, TimberTech Landmark and Vintage, and Fiberon Concordia. All prices are material only, in CAD; installation is extra.

Aluminum Decking vs Premium Composite at a Glance

Factor Aluminum (Craft-Bilt) Premium Composite
Material cost (per sq ft, CAD) $29–31 $18–25
Heat in direct sun Craft-Bilt testing found standard colours no warmer than other decking materials, often cooler Darker colours can run hot in direct sun
Lifespan Limited lifetime warranty for the original owner against structural defects, cracking, peeling and rusting Premium lines carry 50-year limited fade and stain warranties; some add a limited lifetime structural warranty
Maintenance Soap-and-water wash only Low; periodic cleaning, and the cap resists staining better than entry-level boards
Slip resistance (wet) Non-skid texture embedded in the finish Embossed grain pattern; traction varies by product
Fire safety Non-combustible Contains combustible material; fire ratings vary by product
Static build-up None Can occur in dry conditions

Cost: A Smaller Gap Than You Might Expect

Premium capped composite sits roughly $4–13 per sq ft below aluminum in material cost. That gap is real, but it is much narrower than the one between aluminum and entry-level boards. The question for most homeowners becomes whether the differences in fire safety, traction, heat behaviour and long-term durability justify the premium over a good composite.

Material cost is only part of the picture. Installed cost, how long the boards last before replacement, and ongoing upkeep all affect what a deck costs over the life of the home. Aluminum boards never needs refinishing or replacing, and that is where it competes on lifetime value.

Aluminum decking - How does it work

Heat Retention

Dark-coloured composite can become uncomfortably hot in direct summer sun. Craft-Bilt’s in-house heat testing found that its standard colours are no warmer than other decking materials and are often cooler, so aluminum is a strong choice where barefoot comfort matters.

Lifespan and Durability

Premium composite has improved considerably: leading lines now carry 50-year fade and stain warranties, and some add limited lifetime structural coverage. Aluminum’s advantage is structural: it will not rot, warp, splinter, crack or sag, and Craft-Bilt deck boards have been tested well beyond the 100 lb/sq ft code requirement without failure. Craft-Bilt backs its aluminum decking with a limited lifetime warranty for the original owner against structural defects, cracking, peeling and rusting.

Maintenance, Traction and Safety

Both materials are low maintenance compared with wood. Aluminum needs only mild detergent and water, and Craft-Bilt’s powder-coated finish showed no change after four weeks of exposure to ketchup, mustard and beer. For safety, aluminum is non-combustible, which matters in wildfire-prone regions and for homeowners prioritizing fire resistance, and its non-skid texture is embedded in the finish rather than relying on a surface pattern.

Aluminum Railing and Decking

Frequently Asked Questions

Is aluminum decking worth the extra cost over premium composite?

It depends on your priorities. Premium composite costs roughly $4–13 per sq ft less in material. Aluminum adds non-combustible construction, embedded non-skid traction, no static build-up and boards that never need replacing, which many homeowners value for a long-term deck.

Does composite decking get hotter than aluminum?

Darker composite colours can get quite hot in direct sun. Craft-Bilt’s in-house testing found its standard aluminum colours no warmer than other decking materials, and often cooler.

Which lasts longer, aluminum or composite decking?

Both are built for the long term. Premium composite lines typically carry 50-year limited fade and stain warranties, and some add limited lifetime structural coverage. Aluminum decking does not rot, warp or crack, and Craft-Bilt backs it with a limited lifetime warranty for the original owner against structural defects, cracking and peeling.

Is composite decking slippery when wet?

Traction varies by product. Composite boards generally rely on an embossed grain pattern, while aluminum decking has a non-skid texture embedded in its finish. Ask for our Slip Resistance Test Results.

Planning a new deck? Explore Craft-Bilt aluminum decking or find a dealer near you.